How to Install Artificial Grass on Soil: A Quick Guide

(249) 444-8805

Give us a call

[email protected]

Drop us a line

Barrie ON

And surrounding areas

How to Install Artificial Grass on Soil: A Quick Guide

When working on any project, whether it be a home renovation, gardening, or crafting, it is important to properly prepare the area in which the work will take place.

In this article, Artificial Turf Barrie will walk you through the step-by-step process of installing artificial grass on the soil.

Preparing the Area

A well-prepared area sets the stage for success and ensures that the task at hand can be completed efficiently and safely. In this section, we will explore the necessary steps and considerations for preparing the area before beginning any project. From clearing debris, and leveling the ground, to gathering the necessary tools and materials, preparing the area is a crucial first step that should not be overlooked. Whether you are planning to paint a room, plant a garden, or build a new structure, taking the time to properly prepare the area will ultimately save time and prevent potential mishaps along the way. So, let’s dive in and explore the key aspects of preparing the area for your next project.

Clearing the Site

Before proceeding with the installation, the site must be thoroughly cleared. Start by removing any debris and loose materials from the area, making sure to brush off any dirt, leaves, or other unwanted items. If the surface is particularly dirty or stained, consider power washing to ensure a clean and smooth base for the installation.

Additionally, remove any plants and roots that may grow back and disrupt the project in the future. Once all debris and vegetation have been cleared, make sure the surface is even and level. This may involve filling in any holes or ruts and smoothing out any bumps or uneven areas.

Only once the site is completely cleared, and clean, and even should the installation process proceed. By meticulously following these steps and ensuring a clear, debris-free, and even surface, the project will be set up for success.

Remove any existing vegetation or debris from the area

First, use a shovel or spade to dig 3-4 inches deep to remove all existing grass, weeds, and roots from the area where the artificial grass will be installed. Be sure to remove all organic material and debris encountered during this process. Dispose of the removed material properly.

After removing the vegetation, consider using a weed killer on the area to ensure that no weeds or grass regrow in the future. It is also essential to shut down any sprinkler systems and stop watering the existing lawn two weeks to a month before the installation of the artificial grass. This will allow the soil to dry out and make it easier to work with during the installation process.

By removing the existing vegetation, roots, and debris from the area, you will create a clean and smooth surface for the artificial grass to be installed. This will ensure a long-lasting and visually appealing result.

Ensure the soil is level and free of any obstructions

To ensure the soil is level and free of any obstructions, start by spreading the soil evenly across the area where you want to install artificial turf. Use a rake or shovel to redistribute the soil as needed to ensure it’s even and remove any roots or plants that may obstruct the artificial turf installation.

Once the soil is spread out, use a hand tamper or roller to compact the soil and level it out. This will help to flatten any lumps or bumps and create a smooth and level surface for the artificial turf to be installed on.

Ensure that the entire surface is compacted and leveled, paying special attention to any areas that may be uneven.

By using the compactor, you can also remove any remaining obstructions and create a flat and stable base for the artificial turf.

This process will help to ensure that the soil is compacted and level, free of any obstructions, and ready for the installation of artificial turf.

Make sure you use the compactor safely by following the instructions from Ontario’s guide.

Evaluate the slope of the area to ensure proper drainage

When preparing for artificial turf installation, it is crucial to evaluate the slope of the area to ensure proper drainage. This can be done using a level or a slope measuring tool to determine the direction and steepness of the slope. The goal is to ensure that the slope allows water to flow away from the turf area and towards a designated drainage point. Proper drainage is essential to prevent water from pooling on the turf, which can lead to maintenance issues and potential damage to the turf.

If the slope is not sufficient for optimal drainage, adjustments to the landscape may be necessary. This could involve regrading the area to create a more suitable slope or adding a drainage system to effectively direct water away from the turf. The addition of a French drain or a catch basin can help address any standing water issues and ensure that the artificial turf remains in good condition.

By carefully evaluating the slope of the area and addressing any drainage concerns, the artificial turf installation can be set up for long-term success. It is essential to prioritize proper drainage to maintain the quality and longevity of the artificial turf.

Calculate the amount of artificial grass needed for the area

To calculate the amount of artificial grass needed for the area, first, measure the length and width of the space where you want to install the grass. Multiply these two measurements to calculate the square footage of the area.

Take into consideration any odd-shaped areas and add them to your total. It’s important to account for any extra material you may need for cutting and shaping around obstacles such as trees, flower beds, or other structures. This will ensure that you have enough artificial grass to cover the entire area without running out or having to purchase additional material later on.

By accurately calculating the square footage and factoring in any extra material needed, you will be able to determine the exact amount of artificial grass required for your project, saving you time and money in the long run.

Roll out weed membrane over the cleared soil surface

Before starting the installation of the weed membrane, ensure that the soil surface is clear of any debris, rocks, or weeds. Once the area is prepared, roll out the weed membrane over the soil surface, making sure it reaches all edges and overlaps joints by at least 100mm. This will prevent any gaps where weeds can potentially grow.

To secure the membrane, use timber edging to hold it in place. This will help prevent any seeds or weeds from sprouting through the membrane and ensure a more effective barrier. Be sure to follow the manufacturer’s instructions for installation to guarantee the best results.

By using a weed membrane, you can effectively suppress weed growth in your garden or landscaping areas, reducing the need for constant weeding and maintenance. Additionally, it will help to protect your plants and landscaping features from unwanted weeds, saving time and effort in the long run. Follow these guidelines for proper installation and enjoy a weed-free environment.

Layout the artificial turf

To begin laying the artificial turf, first unroll the turf and adjust the edges as necessary to ensure a smooth and even surface. Once the turf is in place, use joining tape and adhesive to connect multiple segments and secure the turf in place. This will prevent any shifting or movement once the turf is in use.

After the turf is securely connected, it’s time to add infill to further enhance the grass’ longevity and natural look. Small granules such as silica sand or durafill are recommended for this purpose. The infill helps to support the blades of the artificial grass, keeping them upright and preventing matting. It also adds weight to the turf, helping to hold it in place and provide a more realistic feel underfoot.

By following these steps and using the appropriate materials like joining tape, adhesive, and infill, you can ensure that your artificial turf is properly laid and will provide a long-lasting and natural-looking surface for a variety of applications.

Trim all edges to make it fit to the area

To ensure a precise and tidy finish for your grass area, start by trimming all edges using a sharp utility knife or scissors. This will help the grass fit perfectly within the designated area. Check for any overlapping edges and remove any excess grass to create a neat and uniform appearance.

When trimming the edges, make sure to leave a small gap between the grass and any hard surface, such as pathways or fencing, to prevent buckling and ensure a smooth transition.

Once all edges are trimmed and excess grass is removed, take a broom and brush the trimmed edges to create a seamless look. This will help blend the edges with the surrounding area, giving it a polished and well-maintained appearance. By following these steps and using the right tools, you can achieve a flawless finish for your grass area.

Use nails to fix the turf

First, make sure the synthetic grass is laid out between the stepping stones or pavers. Then, take the nails and nail the turf down, making sure the nails are placed around one inch apart from each other and centered between the neighboring pavers. This will help secure the turf in place.

Next, peel back the first piece of turf and apply glue to the perimeter to ensure it stays in place. When joining pieces of turf together, be sure to cut S-seams rather than straight lines to create hidden joins. Apply seam tape and turf glue to the joins, and use a weighted lawn roller to ensure the turf is properly stuck down.

Using these steps, you can effectively fix the synthetic grass in place using nails and glue, and create seamless joins with S-seams and seam tape.

Brush the grass surface

To maintain the appearance and longevity of synthetic grass, it is important to regularly brush the surface. Begin by using a broom to brush the infill and fibers of the synthetic grass against the grain. This will help the infill settle and the fibers appear more natural. It is also recommended to use kiln-dried sand to infill the grass, and then brush with a stiff or motorized broom in the direction of the pile. This will give the fibers a good lift and help keep the fake turf in place.

Brushing the synthetic grass surface is essential for minimizing the chance of ripples appearing and protecting the fake grass fibers. By incorporating these steps into your maintenance routine, you can ensure that your synthetic grass remains in top condition for years to come. Remember to regularly brush the surface to maintain the infill and fibers, and to use kiln-dried sand for optimal results. Following these guidelines will help you keep your synthetic grass looking its best.


The steps outlined above emphasize the importance of meticulous preparation and maintenance for any project area. By following these guidelines, you can ensure a smooth project flow, from start to finish, leading to successful outcomes. Remember, a well-prepared area is the foundation of any successful project.

If you are unsure of any of these steps, you should contact a landscaper in your local area so they can help you with the installation. If you live in Barrie, you can contact us for turf installation service. We also provide landscaping services and synthetic grass services in Kitchener and Waterloo.

Call us today and get an estimate!

Get A Quote
Call us for a quote!